-40%
Hamamatsu R6233 KIT Photomultiplier Tube for Scintillation Detector
$ 66
- Description
- Size Guide
Description
These PMTs are able to provide EXCELLENT resolution of less than 6.5% for Cs137 using a quality NaI(Tl) crystal. Average CorningBlue
Value of 12.
Hamamatsu R6233 PMT Photomultiplier Tube with Voltage Divider Kit, BNC Connector and Silicone Coupling Compound. This PMT KIT comes with everything you need to modify it with a modern resistor network. Once modified and combined with a scintillator, these PMTs make an excellent detector for use with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter. These work great with plastic scintillators, but they are high resolution PMTs, so combining with a spectrometry quality scintillator crystal will provide a great detector for gamma spectrometry use.
These tubes are able to provide 6.5% or better FWHM resolution for Cs137 when coupled to a quality NaI(Tl) crystal.
Ships with the Hamamatsu Data Sheet AND fully illustrated instructions for modifying the voltage divider with the provided 120 MegOhm kit. Includes high quality Metal Film 1% resistor set, Ceramic High Voltage Capacitor, two Silver Plated Copper Teflon coated Wire leads, a High quality BNC connector with grounding lug, and Silicone Coupling Compound (for coupling of your crystal to the PMT).
Installing the Voltage Divider in this kit is fairly easy and requires solder equipment and some basic tools. I desoldered and removed the original Hamamatsu voltage divider for you, and provide everything you need to make the new one, with easy to follow illustrated instructions.
The R6233 is a 3 inch (76mm) diameter, Head-on type, Bialkali photocathode. The maximum spectral response is 300 to 650 nm, peaking near 435nm, originally designed for NaI or plastic scintillator based gamma cameras. Once modified, these PMTs are great for Scintillation Counting and an excellent choice for Gamma Spectrometry, with a low profile and High PHR. They are driven easily by voltages starting around 500 volts, and normal operating voltage is 750 to 900 volts
(Maximum recommended 1100 volts)
.
These are NOT the typical 20 to even 50 year old tubes often found on eBay
(usually sold with no guarantee of operation, from sellers who would not know how to test one in the first place)
. This listing is for a modern high performance high quality PMT, one that normally sells for hundreds of dollars when purchased new. Each tube leaves my lab tested and guaranteed to satisfy. If you need more than the quantity eBay says is available, contact me for a special listing and price.
I have tons of other radiation detection related equipment listed, so please check out my
other items
.
I
am always adding new items in this category, so please don't forget to add me to your
favorites list
and come back often!
I ship very fast, same day if early enough, next day otherwise (except Holidays and Weekends). This item will be packed safe and secure. Only shipped to a PayPal Confirmed Address.
The last picture shows a R6233 PMT after wiring the Voltage Divider that comes in this kit. This kit does not included a wired PMT, just the PMT, parts, and instructions to wire it as shown.
Thanks for looking, and don't forget to check out my
other items
! Please Be sure to add me to your
favorites list
!