-40%

New FLIR IR Neutrino Camera Core 640 X 512, 0403 InSb, +K, cooler PCB & mount

$ 14781.35

Availability: 100 in stock
  • IR Sensor Resolution: 640 X 512
  • Condition: New
  • Product: IR Thermal Camera Core
  • Brand: Flir
  • MPN: 425-0025-00
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: United States

    Description

    FLIR
    Neutrino™ MIDWAVE INFRARED COOLED CAMERA MODULE
    Where SWaP are design constraints, and cost and performance is desired, Neutrino™ is the ideal solution. The Neutrino offers FLIR'scommon image processing architecture and the resulting image from the 640×512 InSb array is superb! Weighing in at less than 16 oz (<450 gm) and consuming less than 5 watts at steady-state, it is FLIR's balanced MWIR core optimizing performance, cost, and ease of integration.
    SPECIFICATIONS
    OVERVIEW
    Size (L x W x H)
    12.9 x 4.9 x 7.4 cm (5.1 x 1.9 x 2.9 in)
    Spectral Band
    3.4 - 5.1µm Standard
    Thermal Imager
    640 x 512, (15µm pitch) MWIR InSb
    Weight
    <450 grams (<16 oz)
    CONNECTIONS & COMMUNICATIONS
    Discrete I/O Controls Available
    Custom, configurable at factory
    Primary Electrical Connector
    50-pin Hirose
    RS-232 Compatible Communication
    Auto Baud Rate
    User Configurability via SDK & GUI
    Yes
    ENVIRONMENTAL & APPROVALS
    Humidity
    5% – 95% non-condensing
    Non-Operating Temperature Range
    -55°C to +80°C (-67°F to +176°F)
    Operating Temperature Range
    -40°C to + 71°C (-40°F to +160°F)
    Operational Altitude
    12,192 m (40,000 ft)
    Shock
    (20g shock pulse w/ 11 msec half sine)
    Vibration
    (5.8 grms three axis, 1 hr each)
    FPA CONTROL
    Direct Injection Snapshot Prog operation
    Yes
    Programmable Integration Time
    Yes (.01ms - 32ms)
    ROIC
    ISC0403
    ROIC Modes
    Free run, readout & integration priority
    Well Capacity
    7 x 10⁶ electrons
    IMAGING & OPTICAL
    Analog Video Display Format
    640 x 512 (PAL), 640 x 480 NTSC
    BT656 (8-bit)
    Yes
    Camera Link (14-bit or 8-bit)
    Yes
    CMOS (14-bit or 8-bit)
    Yes
    Color and Monochrome Palettes (LUTs)
    Yes
    Continuous Zoom (digital and analog)
    Yes
    f-number
    f/4 standard, custom, configurable at factory
    FPA - Digital Video Display Format
    640 x 512
    Frame Rate
    30Hz/25Hz
    Full Frame Rate
    30 Hz (NTSC), 25 Hz (PAL)
    LVDS (14-bit or 8-bit)
    Custom, Configurable at factory
    NTSC/PAL (field switchable)
    Yes
    Polarity Control [black hot & white hot]
    Yes
    Sensitivity [NEdT]
    <25mK
    Symbology
    Yes (256 gray and 256 color)
    Time to Image
    <6 min room temp, <10 min at 71°C (160°F)
    Invert/Revert (analog and 8-bit digital)
    Yes
    Image Optimization - AGC
    Linear, Histogram, Once Bright, DDE+, etc.
    POWER
    Input Power
    4.75-6.0 VDC Camera, 9-35 VDC Cryocooler
    Power Dissipation
    <8W cooldown, <5W Steady State
    This unit is still new in the box and cost over K with tax when originally purchased. It was purchased with several others and this particular one was never used.
    This units pairs nicely with Zoom lenses, depending on your application. Original software is included along with some Cooling board components.
    Email or call for any questions.
    This FLIR camera product described above is subject to the controls of
    ITAR 22_CFR 121.1
    .
    Transfer of these products by any means to a foreign person or entity, whether in the US or abroad,
    without appropriate export authorization, is prohibited and may result in substantial penalties.
    You will be required to complete a BIS-711 end use agreement form to ensure that the
    Thermal Imager product will not be exported internationally.
    You may also be required to submit a U.S. passport (for citizenship verification).